Tungsten carbide rod are mostly applied for drill bits, end mills, and reamers with sub-micron grain grade YG10X, for non-ferrous precision cutting and wood cutting with grade YG6X, and for fiberglass reinforced plastics, titanium alloys, hardened steel with ultra-fine grain grade YG8X, etc.
We manufacture and supplier diameter from 2 to 45 Extrusion rods, length can be as requested.
Other size rods also can be produced, Offer OEM Service
Get A Free Quote
Share to
Grade list
| Grade | ISO Code | Chemical Composition(%) | Physical Mechanical Properties (≥) | Application | ||||
| WC | Co | Density g/cm3 | Hardness(HRA) | T.R.S N/mm2 | ||||
| YG3 | K01 | 97 | 3 | 14.9-15.3 | ≥91 | ≥1180 | Suitable for finishing of cast iron,non-ferrous metals,alloys and non-metallic materials,and semi-finishing vehicles for intermittent cutting. | |
| YG6 | K10 | 93.5 | 6 | 14.8-15.1 | ≥92 | ≥1420 | Finishing of chilled hard alloy cast iron and heat resistant alloy steel and ordinary cast iron. | |
| YG6X | K20 | 94 | 6 | 14.7-15.1 | ≥91 | ≥1600 | Cast iron, non-ferrous metals and alloys, non-metallic materials, medium to cutting, semi-finishing and finishing. | |
| YG8 | K20-K30 | 92 | 8 | 14.5-14.9 | ≥90 | ≥1600 | Suitable for casting of cast iron, non-ferrous metals and their alloys and non-metallic materials, roughing of sections and rough cutting. | |
| YG10 | K40 | 90 | 10 | 14.3-14.7 | ≥89 | ≥1900 | Suitable for the production of drawing dies, wear parts and stamping parts and cores for hard alloy automatic presses. | |
| YG10X | K40 | 89 | 10 | 14.3-14.7 | ≥89.5 | ≥2200 | Suitable for small diameter micro drills, end mills, rotary boring tools, etc. | |
| YG15 | K30 | 85 | 15 | 13.9-14.2 | ≥87 | ≥2100 | Forging, perforating and stamping tools for steel bars and steel tubes with high compression ratios and working under large stresses. | |
| YG20 | K30 | 80 | 20 | 13.4-13.7 | ≥85.5 | ≥2500 | Stamping die, stamping watch parts, musical instrument spring piece. | |
| YG20C | K40 | 80 | 20 | 13.4-13.7 | ≥85.5 | ≥2200 | punching battery case, toothpaste skin mold, small size steel ball, screw, nut stamping die, hot rolling twist drill bit plate. | |
| YG30 | G60 | 70 | 30 | 12.80 | ≥82 | ≥2750 | Production of standard parts, bearings, tools and other industries for cold heading, cold punching, cold pressing die. | |
Order Process
Manufacturing Process
Inspection Process
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
